TT-900 Professional Quality In/Outdoor Paella Burner
90cm diameter gas professional burner, extra powerful gas burner for professional and indoor use. Short adjustable leg included. Ideal for paella, rice dishes, dishes prepared in large pots, stews and stills.
Especially suitable for the hospitality, catering, artisanal food and craft microbrewery industries.
NEW!!! 3 position tap: off, high power and low power and precise. Models certified according to European Regulation UE 2016/426 and European Standards UNE EN 497 and UNE EN 203-1 and UNE EN 203-2-1.
- Sturdy, with larger gas chamber and greater power
- Authorised for interior use
- Safety valve with thermocouple
- Pilot Burner
- Security in all burners
- Independent use of rings
- Single thermocouple
- Needle valve stopcock
- Obstruction free
- Greater flame control at maximum and minimum levels.
- Patented Optim System
- Increased gas output
- More powerful, abundant flame
- Lateral flame position
- Greater flame reach
- Better combustion
- Maximum power: 43,95 kw
- Burner diameter: 90 cm
- Cooking pot capacity: 200 to 250 L
- Recommended maximum weight: 180 Kg
1/4″ fitting, thread to the left, for gas hose connection.
Minymum System. Allows precise control of very low flame, easing the cooking process.
|Model||Gas Type||Work pressure||Kw / Kcal/h||Consumption||Number of rings|
|TT-700||1||Butane/Propane||29 mbar / 37 mbar||35,98 / 30.937||4|
|TT-700||2||Propane||50 mbar||43,95 kw (only approved for gas bottles) / 37.790||4|
|TT-700||3||Natural gas||20 mbar||42,03 / 36.139||4|
This burner must be used for the gas for which it was manufactured
The burner must be connected to a butane gas bottle by means of a flexible tube. This tube, which must not be out of date, will be clamped to the burner at one end and to the 30 mbar regulator attached to the bottle at the other end.
Gas installation: The burner must be connected to the installation by means of a standard hose. It is recommended to contact an authorized gas installer if a suitable installation has not been prepared.
Propane bottles: The burner must be connected to a propane gas bottle by means of a flexible tube. This tube, which must not be out of date, will be clamped to the burner at one end and to the 37 or 50 mbar regulator attached to the bottle at the other end.
Must be connected to a gas installation by means of a standard hose. It is recommended to contact an authorized gas installer if a suitable installation has not been prepared.
It is IMPORTANT that the gas burner must be used by professionals and in perfectly ventilated interiors. Do not use the burner with gas other than that for which it is intended. If only the inner rings are used, it is recommended to protect the outer rings to avoid blockages. It is advisable to have a spare bottle to exchange in case of reduced performance.
The maximum recommended weight is 180 Kg, *for heavier weights we recommend the use of an additional support.
Only logged in customers who have purchased this product may leave a review.